Name: Zooz Momentary In-Wall Switch ZAC99 for Z-Wave Dimmer Modules
SKU: 408028

Product Details ＋

Accessorize Affordably

PRODUCT HIGHLIGHTS

1-button momentary switch (press a single paddle in sequence for on/off and hold for dimming)
Adds dimming capability to your favorite Z-Wave dimmer module from the wall switch
Use it with the to complete multi-point installations without neutral
Slim design leaves enough space in the switch box to easily fit a Z-Wave dimmer behind
Clean look and solid built
UL listed: meets North American safety standards
1-year warranty

NOTE: This is NOT a Z-Wave device. You need a compatible Z-Wave dimmer module for wireless control.

HOW IT WORKS

This Zooz Momentary Switch is the perfect addition to your Z-Wave dimmer module. Its operation is simple but its potential is great: tap it to turn your Z-Wave dimmer on, press and hold it to adjust brightness, tap it again to turn it off. It is not a Z-Wave device by itself, and should be used with a behind-the-switch Z-Wave module for wireless functionality.

Use it to complete a 4-way or other complex multi-point control set-ups with the to add Z-Wave to circuits with no neutral. Its slim and compact form factor leaves extra space in your switch box making installation worry-free. The simple decora style will complement most interiors.

INSTALLATION

Before proceeding with the installation, turn off the power in the switch box. Make sure you have either 12 or 14 AWG copper wire, since this is the only type of wiring that’s approved for this installation. If needed, strip the wiring of its insulation (exposing 0.75” will be enough). Connect all wires to all screw terminals, including the ground wire. Tighten all the screws, and secure your Z-Wave module and the momentary switch in the box using the mounting screws. Be sure to handle the wires carefully. Install the wall plate, and turn the power back on to test the device.